Call Now: +1 289-802-2994
Homeowner Sizing Guide

Standard Window & Door Sizes in Canada

The short answer

Canadian windows don’t have one universal standard size. Sizes like 24 × 36 in or 36 × 48 in are useful starting points. Look for single entry door slabs in 32, 34 or 36 in widths, and sliding patio doors in nominal 5, 6 or 8 ft widths.

A catalogue size is not necessarily the rough opening or the clear space you can pass through. Use these charts to plan, then have each opening measured before you order.

Window and door sizes at a glance

What you’re replacingWhat to check first
WindowWidth × height of the unit and the opening it has to fit
Basement egress windowAt least 0.35 m² clear, with neither dimension under 380 mm in Ontario
Single entry door32, 34 or 36 in slab width; verify frame, sill and swing
Sliding patio door5, 6 or 8 ft nominal width; verify the full unit and the clear walk-through

Standard Window Sizes by Style

These are sample catalogue frame sizes, not a list of sizes every supplier makes. A rough opening is the structural opening that the unit fits into. The sample openings below are from the same catalogue as the units; another series may call for different clearance.

Window styleExample frame (W × H)Example rough opening
Casement36 × 48 in36¾ × 48¾ in
Awning30 × 23 in30¾ × 23¾ in
Horizontal slider48 × 23 in48¾ × 23¾ in
Double-hung27 × 50 in27¾ × 50¾ in
Fixed60 × 48 in60¾ × 48¾ in

Examples from JELD-WEN Canada’s DF size guide. Don’t add ¾ in to a different product by default; use its own specifications.

A fixed window gives light and a view; it doesn’t provide ventilation or egress. Browse window styles to see which ones open and how.

Basement Egress Window Sizes in Ontario

An Ontario bedroom egress window needs at least 0.35 m² (about 3.8 sq ft) of unobstructed open area, with neither clear dimension less than 380 mm (about 15 in). Measure the clear space with the window fully open, not the glass, frame or rough opening. There isn’t one frame size that guarantees compliance.

What to measureOntario minimum or rule
Unobstructed open area0.35 m² (about 3.8 sq ft)
Clear width and heightAt least 380 mm (about 15 in) each. A 380 × 380 mm opening falls short on area.
Window well, if presentAt least 550 mm (about 22 in) in front of the window. The open sash must not restrict escape.
OperationOpens from inside without tools and stays open without a prop.

Ontario Building Code, Division B, Article 9.9.10.1. Imperial conversions are rounded for reference; use the metric requirements.

A 500 × 720 mm clear rectangle, for example, gives 0.36 m² and meets both size checks; that alone does not confirm that a particular installation complies. Ask for the unit’s clear-opening specifications and see the Ontario egress guide for when the rule applies. Check with your municipality before enlarging an opening or creating a bedroom.

Standard Front and Entry Door Sizes

The slab is the moving door panel. A prehung unit includes the frame, and the rough opening needs to fit that full unit with room for installation. Sidelites (glass panels beside the door) and a transom (glass above it) change the overall dimensions.

Nominal slab widthExample prehung frame (W × H)
32 in34⅛ × 81½ in
34 in36⅛ × 81½ in
36 in38⅛ × 81½ in

JELD-WEN DF single-entry renovation frame examples. These are frame sizes, not rough openings. Sill type and frame model change the required opening.

If you need a particular walk-through width for accessibility, measure the actual clear passage with the door open. A nominal 36 in slab doesn’t mean 36 in of clear passage.

Standard Sliding Patio Door Sizes

A 6 ft slider is roughly six feet across the entire assembly, not six feet of walk-through space. The fixed panel, track and frame all take up space. For an existing opening, check the threshold height and operating direction as well as the width.

Nominal opening classExample two-panel frame (W × H)
5 ft (60 in)59½ × 79½ in
6 ft (72 in)71½ × 79½ in
8 ft (96 in)95½ × 79½ in

Sample dimensions from the JELD-WEN DF guide. The opening class describes approximate width only. Confirm the exact rough opening, including height, with the chosen model’s installation specifications.

Thinking of going wider? Ask what it would take to change the wall opening before choosing a sliding patio door.

Retrofit or Custom Size? They’re Different Decisions

A retrofit (insert) fits into a sound existing window frame. It can keep your trim intact, but fitting a new unit inside that frame can reduce the visible glass and clear opening. A full-frame replacement removes the old frame so the installer can inspect the rough opening and renew the seals around it.

Either method can use a made-to-measure unit. Custom sizing often makes sense for an older or unusual opening you want to keep. It does not mean the wall has to be cut, and it does not fix damaged framing. If you want to widen or move an opening, ask your municipal building department what approvals you need.

  • For a first conversation, note the approximate width and height in three places and label what you measured: inside the existing frame, outside the trim or at the exposed rough opening.
  • Take photos and point out sloped sills, plumbing, trim you want to keep and any signs of leaks. For doors, note the swing or sliding direction.
  • Before ordering, have an installer verify the opening, jamb depth, out-of-square corners and any required clear passage or egress dimensions.

What would your project cost?

Add up your windows and patio doors and see an installed ballpark in under a minute. Standard vinyl windows run about $1,000–$2,000+ each, installed. No email needed to see your number.

Window and Door Sizing Questions

No. Dimensions depend on the style and product line. A size such as 36 × 48 in is a planning reference; confirm whether the number refers to the frame or rough opening before ordering.

An Ontario bedroom egress window needs at least 0.35 m² (about 3.8 sq ft) of unobstructed open area, with neither clear dimension less than 380 mm (about 15 in). For a window that opens into a well, allow at least 550 mm of clearance in front of the window without restricting escape.

32, 34 and 36 inches are common nominal single-door slab widths. The prehung frame is wider, and the finished clear passage is narrower than the slab. Verify all three for your project.

Six feet is a nominal width, not a universal rough opening. One Canadian catalogue lists a 71½ × 79½ in frame for a six-foot door. Use the rough-opening specification for your exact door and sill, not the nominal size.

Not necessarily. A made-to-measure window can fit an existing opening. Changing the size of the wall opening is separate work that can require a building permit.

Where these facts come from

Catalogue examples and the Ontario egress rule were checked on November 18, 2026. Confirm current dimensions with the supplier and code requirements with your local building department.

Get Your Openings Measured Before You Order

At your free in-home visit, LAB can measure the existing openings and explain which sizes, styles and installation methods fit your home.